[    0.000000] Linux version 4.19.188-transmeta (goletsa@wheezy-builder) (gcc version 4.7.2 (Debian 4.7.2-5)) #3 Wed Apr 21 21:15:13 MSK 2021
[    0.000000] x86/fpu: x87 FPU will use FSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000095bff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000095c00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001efeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001eff0000-0x000000001eff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000001eff8000-0x000000001effffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: Elitegroup Co. i-Buddie/Ref.NO:A530-yymmdd-OT-01-00-FF-FF$, BIOS Version 07.00T 04/02/01
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 998.743 MHz processor
[    0.013777] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.013923] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.014735] last_pfn = 0x1eff0 max_arch_pfn = 0x100000
[    0.014908] Disabled
[    0.014961] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.015037] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.052325] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.054903] RAMDISK: [mem 0x1de2c000-0x1e550fff]
[    0.055048] ACPI: Early table checksum verification disabled
[    0.063330] ACPI: RSDP 0x00000000000FAD50 000014 (v00 AMI   )
[    0.063657] ACPI: RSDT 0x000000001EFF0000 000028 (v01 AMIINT AMIINT09 00000011 MSFT 00000097)
[    0.063973] ACPI: FACP 0x000000001EFF0030 000081 (v01 AMIINT AMIINT09 00000011 MSFT 00000097)
[    0.064372] ACPI: DSDT 0x000000001EFF00C0 002CE0 (v01 TM5600 TMx86    00001000 MSFT 0100000D)
[    0.065464] ACPI: FACS 0x000000001EFF8000 000040
[    0.066450] 0MB HIGHMEM available.
[    0.066533] 495MB LOWMEM available.
[    0.066582]   mapped low ram: 0 - 1eff0000
[    0.066628]   low ram: 0 - 1eff0000
[    0.066765] Zone ranges:
[    0.066806]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.067224]   Normal   [mem 0x0000000001000000-0x000000001efeffff]
[    0.067577]   HighMem  empty
[    0.067632] Movable zone start for each node
[    0.067669] Early memory node ranges
[    0.068350]   node   0: [mem 0x0000000000001000-0x0000000000094fff]
[    0.070191]   node   0: [mem 0x0000000000100000-0x000000001efeffff]
[    0.070416] Initmem setup node 0 [mem 0x0000000000001000-0x000000001efeffff]
[    0.070787] On node 0 totalpages: 126852
[    0.084912]   DMA zone: 36 pages used for memmap
[    0.084977]   DMA zone: 0 pages reserved
[    0.085274]   DMA zone: 3988 pages, LIFO batch:0
[    0.087269]   Normal zone: 1080 pages used for memmap
[    0.087486]   Normal zone: 122864 pages, LIFO batch:31
[    0.106799] Using APIC driver default
[    0.107872] ACPI: PM-Timer IO Port: 0x808
[    0.107985] No local APIC present or hardware disabled
[    0.108479] APIC: disable apic facility
[    0.108503] APIC: switched to apic NOOP
[    0.110031] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.110123] PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
[    0.110158] PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
[    0.110193] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.110226] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.110313] [mem 0x1f000000-0xfffbffff] available for PCI devices
[    0.110329] Booting paravirtualized kernel on bare hardware
[    0.110402] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.110695] random: get_random_bytes called from start_kernel+0x71/0x444 with crng_init=0
[    0.112278] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.112328] pcpu-alloc: [0] 0 
[    0.113087] Built 1 zonelists, mobility grouping on.  Total pages: 125736
[    0.113126] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.188-transmeta root=UUID=dd879d88-1eb3-49da-9b72-d7d602a0164b ro quiet
[    0.115991] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.117079] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.117811] Initializing CPU#0
[    0.117960] Initializing HighMem for node 0 (00000000:00000000)
[    0.144473] Memory: 485104K/507408K available (6052K kernel code, 690K rwdata, 1916K rodata, 864K init, 364K bss, 22304K reserved, 0K cma-reserved, 0K highmem)
[    0.145160] virtual kernel memory layout:
[    0.145160]     fixmap  : 0xfffa1000 - 0xfffff000   ( 376 kB)
[    0.145160]   cpu_entry : 0xffc00000 - 0xffc28000   ( 160 kB)
[    0.145160]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.145160]     vmalloc : 0xdf7f0000 - 0xff3fe000   ( 508 MB)
[    0.145160]     lowmem  : 0xc0000000 - 0xdeff0000   ( 495 MB)
[    0.145160]       .init : 0xc1889000 - 0xc1961000   ( 864 kB)
[    0.145160]       .data : 0xc15e914f - 0xc187a900   (2629 kB)
[    0.145160]       .text : 0xc1000000 - 0xc15e914f   (6052 kB)
[    0.145180] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.161440] ftrace: allocating 27452 entries in 54 pages
[    0.261944] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
[    0.266582] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.276823] Console: colour VGA+ 80x25
[    0.277225] console [tty0] enabled
[    0.277371] ACPI: Core revision 20180810
[    0.282005] ACPI: setting ELCR to 0010 (from 0e20)
[    0.283088] APIC: Keep in PIC mode(8259)
[    0.283259] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1ccae73d6d2, max_idle_ns: 881590459501 ns
[    0.284656] Calibrating delay loop (skipped), value calculated using timer frequency.. 1997.48 BogoMIPS (lpj=3994972)
[    0.285187] pid_max: default: 32768 minimum: 301
[    0.288721] Security Framework initialized
[    0.289055] Yama: becoming mindful.
[    0.289523] AppArmor: AppArmor disabled by boot time parameter
[    0.290505] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.290695] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.306788] CPU: Processor revision 1.5.0.2, 1000 MHz
[    0.306949] CPU: Code Morphing Software revision 4.4.3-10-184
[    0.306973] CPU: 20030618 15:27 official release 4.4.3#1
[    0.307003] CPU serial number disabled.
[    0.307481] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.307625] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.308237] CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (family: 0x5, model: 0x4, stepping: 0x3)
[    0.308346] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.308495] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
[    0.308513] Speculative Store Bypass: Vulnerable
[    0.309653] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    0.310060] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.338883] Performance Events: no PMU driver, software events only.
[    0.354696] NMI watchdog: Perf NMI watchdog permanently disabled
[    0.362141] devtmpfs: initialized
[    0.377350] PM: Registering ACPI NVS region [mem 0x1eff8000-0x1effffff] (32768 bytes)
[    0.381989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.382408] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.386159] pinctrl core: initialized pinctrl subsystem
[    0.398772] NET: Registered protocol family 16
[    0.401871] audit: initializing netlink subsys (disabled)
[    0.407898] audit: type=2000 audit(1619129315.120:1): state=initialized audit_enabled=0 res=1
[    0.409059] EISA bus registered
[    0.409520] cpuidle: using governor ladder
[    0.409551] cpuidle: using governor menu
[    0.410285] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[    0.410520] ACPI: bus type PCI registered
[    0.410548] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.454626] PCI: PCI BIOS revision 2.10 entry at 0xfda61, last bus=0
[    0.454671] PCI: Using configuration type 1 for base access
[    0.481952] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[    0.490726] ACPI: Added _OSI(Module Device)
[    0.490932] ACPI: Added _OSI(Processor Device)
[    0.490960] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.490983] ACPI: Added _OSI(Processor Aggregator Device)
[    0.491019] ACPI: Added _OSI(Linux-Dell-Video)
[    0.491047] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.545879] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.598746] ACPI: Interpreter enabled
[    0.599462] ACPI: (supports S0 S1 S4 S5)
[    0.599489] ACPI: Using PIC for interrupt routing
[    0.599786] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.600928] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.653969] ACPI: Power Resource [URP1] (off)
[    0.656021] ACPI: Power Resource [URP2] (off)
[    0.657538] ACPI: Power Resource [FDDP] (off)
[    0.658935] ACPI: Power Resource [LPTP] (off)
[    0.706086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00])
[    0.706201] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.706358] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.706423] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.711943] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.712019] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.712071] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.712122] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff window] (ignored)
[    0.712172] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff window] (ignored)
[    0.712222] acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff window] (ignored)
[    0.712273] acpi PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff window] (ignored)
[    0.712323] acpi PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff window] (ignored)
[    0.712373] acpi PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff window] (ignored)
[    0.712423] acpi PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff window] (ignored)
[    0.712954] acpi PNP0A03:00: host bridge window [mem 0x1f00e000-0xffdfffff window] (ignored)
[    0.713012] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.713033] PCI: root bus 00: using default resources
[    0.716600] PCI host bridge to bus 0000:00
[    0.716924] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.716979] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.717103] pci_bus 0000:00: root bus resource [bus 00]
[    0.717270] pci 0000:00:00.0: [1279:0395] type 00 class 0x060000
[    0.717625] pci 0000:00:00.0: reg 0x10: [mem 0xefe00000-0xefefffff]
[    0.719531] pci 0000:00:00.1: [1279:0396] type 00 class 0x050000
[    0.721916] pci 0000:00:00.2: [1279:0397] type 00 class 0x050000
[    0.725302] pci 0000:00:05.0: [10ec:8139] type 00 class 0x020000
[    0.725530] pci 0000:00:05.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.726671] pci 0000:00:05.0: reg 0x14: [mem 0xeffaee00-0xeffaeeff]
[    0.727501] pci 0000:00:05.0: supports D1 D2
[    0.727528] pci 0000:00:05.0: PME# supported from D1 D2 D3hot D3cold
[    0.729192] pci 0000:00:06.0: [10b9:5451] type 00 class 0x040100
[    0.729858] pci 0000:00:06.0: reg 0x10: [io  0xda00-0xdaff]
[    0.729911] pci 0000:00:06.0: reg 0x14: [mem 0xeff9a000-0xeff9afff]
[    0.730372] pci 0000:00:06.0: supports D1 D2
[    0.730427] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[    0.731880] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100
[    0.734346] pci 0000:00:08.0: [10b9:5457] type 00 class 0x070300
[    0.734722] pci 0000:00:08.0: reg 0x10: [mem 0xeff9b000-0xeff9bfff]
[    0.734922] pci 0000:00:08.0: reg 0x14: [io  0xde00-0xdeff]
[    0.735600] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.736849] pci 0000:00:09.0: [1039:0325] type 00 class 0x030000
[    0.736988] pci 0000:00:09.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.737245] pci 0000:00:09.0: reg 0x14: [mem 0xeffc0000-0xefffffff]
[    0.737288] pci 0000:00:09.0: reg 0x18: [io  0xdc00-0xdc7f]
[    0.737529] pci 0000:00:09.0: reg 0x30: [mem 0xeffb0000-0xeffbffff pref]
[    0.737769] pci 0000:00:09.0: supports D1 D2
[    0.738534] pci 0000:00:0a.0: [10b9:5237] type 00 class 0x0c0310
[    0.738611] pci 0000:00:0a.0: reg 0x10: [mem 0xeffab000-0xeffabfff]
[    0.738907] pci 0000:00:0a.0: PME# supported from D0 D1 D3hot D3cold
[    0.739956] pci 0000:00:0a.1: [10b9:5237] type 00 class 0x0c0310
[    0.740227] pci 0000:00:0a.1: reg 0x10: [mem 0xeffac000-0xeffacfff]
[    0.740410] pci 0000:00:0a.1: PME# supported from D0 D1 D3hot D3cold
[    0.741663] pci 0000:00:0a.2: [10b9:5237] type 00 class 0x0c0310
[    0.741747] pci 0000:00:0a.2: reg 0x10: [mem 0xeffad000-0xeffadfff]
[    0.742055] pci 0000:00:0a.2: PME# supported from D0 D1 D3hot D3cold
[    0.743047] pci 0000:00:0a.3: [10b9:5239] type 00 class 0x0c0320
[    0.743127] pci 0000:00:0a.3: reg 0x10: [mem 0xeffaef00-0xeffaefff]
[    0.743516] pci 0000:00:0a.3: PME# supported from D0 D3hot D3cold
[    0.744724] pci 0000:00:0b.0: [8086:1043] type 00 class 0x028000
[    0.745007] pci 0000:00:0b.0: reg 0x10: [mem 0xeffaf000-0xeffaffff]
[    0.746151] pci 0000:00:10.0: [10b9:5229] type 00 class 0x0101fa
[    0.746489] pci 0000:00:10.0: reg 0x20: [io  0xff00-0xff0f]
[    0.746536] pci 0000:00:10.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.746555] pci 0000:00:10.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.746665] pci 0000:00:10.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.746683] pci 0000:00:10.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.747744] pci 0000:00:11.0: [10b9:7101] type 00 class 0x068000
[    0.747944] pci 0000:00:11.0: quirk: [io  0x0800-0x083f] claimed by ali7101 ACPI
[    0.747980] pci 0000:00:11.0: quirk: [io  0x0c00-0x0c1f] claimed by ali7101 SMB
[    0.749630] pci_bus 0000:00: on NUMA node 0
[    0.756471] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 12 14 15)
[    0.757195] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.758303] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15)
[    0.760342] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *9 10 11 12 14 15)
[    0.761468] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.762114] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15), disabled.
[    0.762665] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.763858] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 14 15)
[    0.764485] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
[    0.768230] pci 0000:00:09.0: vgaarb: setting as boot VGA device
[    0.768260] pci 0000:00:09.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.768368] pci 0000:00:09.0: vgaarb: bridge control possible
[    0.768386] vgaarb: loaded
[    0.769575] EDAC MC: Ver: 3.0.0
[    0.773563] PCI: Using ACPI for IRQ routing
[    0.773830] PCI: pci_cache_line_size set to 32 bytes
[    0.775852] e820: reserve RAM buffer [mem 0x00095c00-0x0009ffff]
[    0.775899] e820: reserve RAM buffer [mem 0x1eff0000-0x1fffffff]
[    0.782245] clocksource: Switched to clocksource tsc-early
[    0.875118] VFS: Disk quotas dquot_6.6.0
[    0.875507] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.877829] pnp: PnP ACPI init
[    0.880104] system 00:00: [io  0x040b] has been reserved
[    0.880162] system 00:00: [io  0x0480-0x048f] has been reserved
[    0.880185] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.880207] system 00:00: [io  0x04d6] has been reserved
[    0.880236] system 00:00: [io  0x0800-0x083f] has been reserved
[    0.880257] system 00:00: [io  0x0840-0x085f] has been reserved
[    0.880279] system 00:00: [io  0x03f0-0x03f1] has been reserved
[    0.880609] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.881966] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.883038] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.884296] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.887197] pnp 00:04: [dma 3]
[    0.890215] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.892093] pnp: PnP ACPI: found 5 devices
[    0.892133] PnPBIOS: Disabled
[    0.982558] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.983235] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.983259] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.983975] NET: Registered protocol family 2
[    0.988637] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[    0.988864] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.989040] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.989175] TCP: Hash tables configured (established 4096 bind 4096)
[    0.989680] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.989962] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.992007] NET: Registered protocol family 1
[    0.992808] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[    0.992925] pci 0000:00:09.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.995760] PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.995790] PCI: setting IRQ 11 as level-triggered
[    0.999686] PCI Interrupt Link [LNKC] enabled at IRQ 10
[    0.999714] PCI: setting IRQ 10 as level-triggered
[    1.002548] PCI Interrupt Link [LNKD] enabled at IRQ 9
[    1.002576] PCI: setting IRQ 9 as level-triggered
[    1.004775] PCI Interrupt Link [LNKA] enabled at IRQ 5
[    1.004798] PCI: setting IRQ 5 as level-triggered
[    1.005370] PCI: CLS 32 bytes, default 32
[    1.009310] Unpacking initramfs...
[    1.304530] random: fast init done
[    1.748138] Freeing initrd memory: 7316K
[    1.755316] Initialise system trusted keyrings
[    1.757285] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    1.757545] zbud: loaded
[    2.779771] tsc: Refined TSC clocksource calibration: 998.692 MHz
[    2.779887] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cca86e78a4, max_idle_ns: 881590499870 ns
[    2.779953] clocksource: Switched to clocksource tsc
[   10.070919] Key type asymmetric registered
[   10.070945] Asymmetric key parser 'x509' registered
[   10.071147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[   10.072414] io scheduler noop registered
[   10.072436] io scheduler deadline registered
[   10.072685] io scheduler cfq registered (default)
[   10.072709] io scheduler mq-deadline registered
[   10.072728] io scheduler kyber registered
[   10.076511] isapnp: Scanning for PnP cards...
[   10.433311] isapnp: No Plug & Play device found
[   10.435169] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   10.441411] Linux agpgart interface v0.103
[   10.444671] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   10.447244] i8042: Detected active multiplexing controller, rev 1.1
[   10.448252] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.448670] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   10.448725] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   10.449021] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   10.449232] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   10.451279] mousedev: PS/2 mouse device common for all mice
[   10.452344] rtc_cmos 00:01: RTC can wake from S4
[   10.454382] rtc_cmos 00:01: registered as rtc0
[   10.454609] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[   10.455988] platform eisa.0: Probing EISA bus 0
[   10.457428] platform eisa.0: EISA: Detected 0 cards
[   10.457518] ledtrig-cpu: registered to indicate activity on CPUs
[   10.461096] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[   10.472364] NET: Registered protocol family 10
[   10.477953] Segment Routing with IPv6
[   10.478325] mip6: Mobile IPv6
[   10.478362] NET: Registered protocol family 17
[   10.478422] mpls_gso: MPLS GSO support
[   10.478677] Using IPI Shortcut mode
[   10.479766] sched_clock: Marking stable (10462967751, 16506132)->(11694054489, -1214580606)
[   10.482327] registered taskstats version 1
[   10.482347] Loading compiled-in X.509 certificates
[   10.482842] zswap: loaded using pool lzo/zbud
[   10.490496] rtc_cmos 00:01: setting system clock to 2021-04-22 22:08:46 UTC (1619129326)
[   10.503014] Freeing unused kernel image memory: 864K
[   10.505942] Write protecting the kernel text: 6056k
[   10.506251] Write protecting the kernel read-only data: 1936k
[   10.506262] Run /init as init process
[   10.898086] systemd-udevd[61]: starting version 204
[   11.736758] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   11.736802] 8139cp 0000:00:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   11.768988] 8139too: 8139too Fast Ethernet driver 0.9.28
[   11.792260] 8139too 0000:00:05.0 eth0: RealTek RTL8139 at 0x(ptrval), 00:0d:87:8c:9c:cb, IRQ 10
[   11.792958] ACPI: bus type USB registered
[   11.793236] usbcore: registered new interface driver usbfs
[   11.793334] usbcore: registered new interface driver hub
[   11.793472] usbcore: registered new device driver usb
[   11.805698] SCSI subsystem initialized
[   11.812906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.840836] ehci-pci: EHCI PCI platform driver
[   11.841701] ehci-pci 0000:00:0a.3: EHCI Host Controller
[   11.841838] ehci-pci 0000:00:0a.3: new USB bus registered, assigned bus number 1
[   11.841926] ehci-pci 0000:00:0a.3: debug port 1
[   11.842621] ehci-pci 0000:00:0a.3: irq 5, io mem 0xeffaef00
[   11.850580] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   11.853981] ohci-pci: OHCI PCI platform driver
[   11.869810] ehci-pci 0000:00:0a.3: USB 2.0 started, EHCI 1.00
[   11.875144] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[   11.875174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.875188] usb usb1: Product: EHCI Host Controller
[   11.875200] usb usb1: Manufacturer: Linux 4.19.188-transmeta ehci_hcd
[   11.875211] usb usb1: SerialNumber: 0000:00:0a.3
[   11.882388] hub 1-0:1.0: USB hub found
[   11.886134] hub 1-0:1.0: 6 ports detected
[   11.902059] ohci-pci 0000:00:0a.0: OHCI PCI host controller
[   11.902171] ohci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 2
[   11.902448] ohci-pci 0000:00:0a.0: irq 11, io mem 0xeffab000
[   11.910867] libata version 3.00 loaded.
[   11.918879] pata_ali 0000:00:10.0: can't derive routing for PCI INT A
[   11.947942] scsi host0: pata_ali
[   11.957294] scsi host1: pata_ali
[   11.958286] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[   11.958316] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[   11.964994] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[   11.965025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.965038] usb usb2: Product: OHCI PCI host controller
[   11.965050] usb usb2: Manufacturer: Linux 4.19.188-transmeta ohci_hcd
[   11.965061] usb usb2: SerialNumber: 0000:00:0a.0
[   11.972299] hub 2-0:1.0: USB hub found
[   11.972533] hub 2-0:1.0: 2 ports detected
[   11.981898] ohci-pci 0000:00:0a.1: OHCI PCI host controller
[   11.982020] ohci-pci 0000:00:0a.1: new USB bus registered, assigned bus number 3
[   11.982320] ohci-pci 0000:00:0a.1: irq 10, io mem 0xeffac000
[   12.042849] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[   12.042884] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.042896] usb usb3: Product: OHCI PCI host controller
[   12.042908] usb usb3: Manufacturer: Linux 4.19.188-transmeta ohci_hcd
[   12.042919] usb usb3: SerialNumber: 0000:00:0a.1
[   12.044813] hub 3-0:1.0: USB hub found
[   12.044991] hub 3-0:1.0: 2 ports detected
[   12.047783] ohci-pci 0000:00:0a.2: OHCI PCI host controller
[   12.047897] ohci-pci 0000:00:0a.2: new USB bus registered, assigned bus number 4
[   12.048181] ohci-pci 0000:00:0a.2: irq 9, io mem 0xeffad000
[   12.112442] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[   12.112470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.112483] usb usb4: Product: OHCI PCI host controller
[   12.112494] usb usb4: Manufacturer: Linux 4.19.188-transmeta ohci_hcd
[   12.112505] usb usb4: SerialNumber: 0000:00:0a.2
[   12.116892] hub 4-0:1.0: USB hub found
[   12.117075] hub 4-0:1.0: 2 ports detected
[   12.424782] ata1.00: ATA-7: FUJITSU MHV2040AT, 000000A0, max UDMA/100
[   12.424819] ata1.00: 78140160 sectors, multi 16: LBA 
[   12.434836] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2040A 00A0 PQ: 0 ANSI: 5
[   12.515739] usb 4-1: new full-speed USB device number 2 using ohci-pci
[   12.604925] ata2.00: ATAPI: Slimtype COMBO LSC-24082K, JKE5, max UDMA/33
[   12.604994] ata2.00: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
[   12.605005] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[   12.614322] scsi 1:0:0:0: CD-ROM            Slimtype COMBO LSC-24082K JKE5 PQ: 0 ANSI: 5
[   12.704396] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.3 GiB)
[   12.705043] sd 0:0:0:0: [sda] Write Protect is off
[   12.705077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.706202] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.738663] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
[   12.738700] cdrom: Uniform CD-ROM driver Revision: 3.20
[   12.746740] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   12.761968] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.762680] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   12.782008] usb 4-1: New USB device found, idVendor=124a, idProduct=168b, bcdDevice= 1.32
[   12.782039] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.782051] usb 4-1: Product: IEEE 802.11b PRISM3 USB
[   12.782062] usb 4-1: Manufacturer: AirVast Taiwan
[   13.209872]  sda: sda1 sda2 < sda5 >
[   13.230653] sd 0:0:0:0: [sda] Attached SCSI disk
[   14.336613] device-mapper: uevent: version 1.0.3
[   14.341972] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[   14.514292] PM: Image not found (code -22)
[   14.589864] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   14.589901] EXT4-fs (sda1): write access will be enabled during recovery
[   16.257872] EXT4-fs (sda1): recovery complete
[   16.292778] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   16.524631] random: crng init done
[   30.549307] systemd-udevd[269]: starting version 204
[   32.732663] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   32.733107] ACPI: Power Button [PWRB]
[   32.733971] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[   32.734071] ACPI: Lid Switch [LID0]
[   32.734707] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   32.735483] ACPI: Power Button [PWRF]
[   32.797955] parport_pc 00:04: reported by Plug and Play ACPI
[   32.798310] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   34.077925] pci 0000:00:11.0: enabling device (0000 -> 0001)
[   34.083495] alim1535_wdt: initialized. timeout=60 sec (nowayout=0)
[   34.212382] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   34.212542] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   34.615491] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   35.445008] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   35.445090] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   35.721255] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0x1d6eb1, caps: 0xa04713/0x4006/0x0/0x0, board id: 0, fw id: 21502
[   35.759261] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[   35.816274] PCI Interrupt Link [LNKH] enabled at IRQ 5
[   35.849222] ppdev: user-space parallel port driver
[   35.852601] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   35.950571] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   35.950655] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   37.485696] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   37.510158] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   37.510217] cfg80211: failed to load regulatory.db
[   37.534198] lib80211: common routines for IEEE802.11 drivers
[   37.534236] lib80211_crypt: registered algorithm 'NULL'
[   37.606534] libipw: 802.11 data/management/control stack, git-1.1.13
[   37.606560] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   37.657597] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[   37.657623] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[   37.662238] PCI Interrupt Link [LNKE] enabled at IRQ 10
[   37.674963] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[   40.995526] snd_ali5451 0000:00:06.0: AC'97 1 does not respond - RESET
[   41.027453] snd_ali5451 0000:00:06.0: AC'97 1 access is not valid [0xffffffff], removing mixer.
[   41.027922] snd_ali5451 0000:00:06.0: ali mixer 1 creating error.
[   45.421728] Adding 489468k swap on /dev/sda5.  Priority:-2 extents:1 across:489468k FS
[   45.591017] EXT4-fs (sda1): re-mounted. Opts: (null)
[   46.436152] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   47.167677] loop: module loaded
[   60.459561] hdaps: supported laptop not found!
[   60.459597] hdaps: driver init failed (ret=-19)!
[   81.752871] 8139too 0000:00:05.0 eth0: link down
[   81.754987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   82.026470] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   83.171769] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  188.082044] lib80211_crypt: registered algorithm 'CCMP'
[  188.320385] lib80211_crypt: registered algorithm 'TKIP'
[  189.097818] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  200.881959] FS-Cache: Loaded
[  200.977592] Key type dns_resolver registered
[  201.264515] FS-Cache: Netfs 'cifs' registered for caching
[  201.266367] Key type cifs.spnego registered
[  201.266657] Key type cifs.idmap registered
[  201.313321] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.