NOTE: (GB 30-12-2008) These are the Latest 'Turtle Beach Malibu' Dos Soundcard Drivers. I am quite sure these are unmodified files from the v1.80 generic CS423X chipset drivers. This is the latest release that also supports the CS4232. Unfortunately the generic driver package is unusable without a windows 3.1 installer, so use this package instead. Additional related info placed in the XTRA folder. CWAUDIO.BIN was not originally in the turtle beach package, so I took that one from the matching windows 3.1 package. Added is CWD.bat which should configure your soundcard when run. ----------------------------------------------------------------------------- README.TXT 11/11/97 To install for DOS, create a Malibu directory on your hard drive. Example, at a C:> DOS prompt, type md MALIBU. Then, copy all these files to that directory. Edit the config.sys and add the line DEVICE=C:\MALIBU\CS4232C.EXE /O to the beginning of the file. Make sure the CS4232.INI file is in the MALIBU directory. Reboot the machine and it will initialize the card with the resource settings contained in the CS4232.INI file. If you need to change your resource settings, run the CS32CFG.EXE program. It will update the CS4232.INI file and the autoexec.bat with any changes you make. Here is a description of all files included. CS32CFG.EXE Configuration program for the sound card (v1.80) CS32HMX.EXE Hot key mixer (v1.80) CS32INTR.EXE Program integrator. Run this to have access to all programs (v1.80) CS32MIX.EXE mixer (v1.80) CS32WSS.EXE Run the sound card in Windows Sound System mode (v1.80) CS4232.INI Configuration settings for the card. CS4232C.EXE Initialization program for the card. (v2.01 T3) It must go in the config.sys as Device=c:\malibu\cs4232c.exe /o CSACGUCD.EXE CD player (v1.80) CW3DCTRL.EXE 3d Surround Sound controller (v1.80) CWDIAG.EXE Diagnostics (v1.80) SOUNDTST.WAV Wave file for testing TEST.DAT Test data README.TXT You're reading it! DIALOG.FON Font file Turtle Beach Systems